Network Configuration

Contents

Network Configuration

Description

With a dedicated Nexthink Act remote action, obtain information about connected, disconnected and WiFi adapters from a device. Useful for troubleshooting network-related issues.

Platforms

  • Windows 10 and 7.

License modules

  • Nexthink Act.

Compatibility

  • Nexthink V6.14 and later.

Script Get Network Configuration

  • Version 1.1.0.0 - Fix issue 25678 related to bad Wifi information format and some code improvements.
  • Version 1.0.0.0 - Initial release.

Script Description

Returns the current network configurations for all connected adapters (adapter name, MAC and IP addresses, Subnet Mask, Gateway, Domain, DNS, speed, DHCP), the list of the disconnected adapters with their MAC address and WiFi information like the SSID, channel and signal strength. Useful for troubleshooting network-related issues.

Execution context and suggested scheduling

Run the script manually as local system.

Parameters

None.

Outputs

ID Label Type Description
1 ConnectedAdapters StringList Current network configuration for the adapters with state "connected"
2 OtherConnectedAdapters StringList Current network configuration for the adapters with state "connected" (used only if more than 4 connected adapters exist)
3 WiFiInformation StringList Information regarding the WiFi connection, like SSID, signal strength, channel, etc.
4 DisconnectedAdapters StringList Name and MAC address of the adapters with state "disconnected"